Ective LC 540s LT battery, is the CAN port compatible with CERBO GX?

DIY
,
1

Hello,

Ective isn’t able to answer this question; could the CERBO GX be connected to the ECTIVE lithium battery (LC 540s LT) CAN port and get the right informations ?

Thanks in advance

2

This depends on the pin out, baud rate and protocol used. Ective should be able to supply the first 2 of these 3 bits of information. The third can most easily be checked by trying to connect after getting the first 2 bits of info.

3

Also wondering if anyone has the Ective LC 540s LT battery plugged into the CERBO GX?

Dear Mr. ,

Thank you for your message.

It is rather unusual that you were referred to us with this type of inquiry. As we are not Victron dealers and do not distribute their products, we are unfortunately unable to provide any binding information regarding their installation or configuration.

We do not have access to the performance data or the specific technical information required to make a qualified assessment. Additionally, for legal reasons, we are not permitted to provide connection instructions for third-party products.

We do, however, offer our own range of inverters and consider it our responsibility to provide our customers with detailed advice on topics such as cable sizing and performance requirements – but only in relation to our own products.

We hope for your understanding in this matter. Please contact your dealer or an authorized Victron distributor directly for assistance.

Mit freundlichen Grüßen

ECTIVE Technische Produktberatung