I have updated my EVCS to v2.05/5.2 firmware and now the display on both the web interface and the LCD shows the EVCS connected to the Victron Inverter AC output even though it is on the AC input / grid side and the “EV Charger position:” setting is set to “Inverter AC In”. After toggling the settin…

I don’t have EVCS, but I have a hypothesis. In venus os (cerbo) it also displays all inputs on the left and all consumers on the right, independent on the physical location. Perhaps the same for EVCS display. In VRM (online webpage or app) shows the location as per settings

i use the virtual device for EVCS It even shows it connected to essential loads, no chance to alter it

I have a similar, but more dynamic issue. Unfortunately no news so far… [image] EVCS changes position from AC IN to AC OUT EVCS Hi everyone, in one of my installations I have a strange issue with the EVCS indication in the VRM dashboard. Although the EVCS pos…

Display on EVCS shows EVCS on AC Output regardless of location setting

Q&A and troubleshooting EVCS

JochenKu 2 May 2026 14:15 4

I have a similar, but more dynamic issue. Unfortunately no news so far…

Topic		Replies	Views
EVCS changes position from AC IN to AC OUT EVCS vrm	0	72	16 April 2026
Position Solar yield in EVCS EVCS beginner , evcs , vrm , ev_charging_station	8	135	25 July 2025
EV Charger plus EM540 on Ac-In wrong power consumption calculation EVCS vrm , cerbo_gx	3	229	15 April 2026
Evcs display does not show generator in off grid system EVCS offgrid , evcs , vrm , display , cerbo_gx	2	71	23 February 2026
Position of AC loads and inputs in VRM for a Multiplus II GX DIY beginner , ess , pv_inverter , vrm , display	2	705	14 March 2025

Display on EVCS shows EVCS on AC Output regardless of location setting

Related topics