DC Cerbo Display

DIY
, , ,
1

DC System power shows 0 but other DC devices shows incoming current. How can I show the ‘Other’ on the main display ?

20241002_100823
20241002_1008231920×1080 143 KB

20241002_100856
20241002_1008561810×1019 187 KB

2

DC system is not the total DC system, connected Vicyron devices which report direct are not counted as part of the DC system.

See the FAQ

https://community.victronenergy.com/t/the-dc-system-power-on-a-venus-device-is-jumping-erratic-or-does-not-match-other-loads/91