Data coming out from Lynx Smart BMS

Q&A and troubleshooting
, ,
1

Hi, we got Lynx Smart BMS and it is connected to our Quattro 15KVA Inverter. We tried to read the data through the modbus but some of the alarm or message got no reply.

Batt_Voltage(Can read)
Batt_Current(Can read)
Batt_Power(Can read)
Batt_SOC (Can read)
Alarm_Batt_LowVoltage (Not Working / unable to test)
Alarm_Batt_HighVoltage (Not Working / unable to test)
Alarm_Batt_LowSoc(Can read)
Alarm_Batt_LowTemperature (Not Working / unable to test)
Alarm_Batt_HighTemperature (Not Working / unable to test)
Alarm_Batt_MidVoltage (Not Working / unable to test)
Alarm_Batt_FuseBlown (Not Working)
Alarm_Batt_HighInternalTemperature (Not Working / unable to test)
Alarm_Batt_HighChargeCurrent (Not Working / unable to test)
Alarm_Batt_HighDischargeCurrent (Not Working / unable to test)
Alarm_Batt_CellImbalance (Not Working / unable to test)
Alarm_Batt_InternalFailure (Not Working / unable to test)
Alarm_Batt_HighChargeTemperature (Not Working / unable to test)
Alarm_Batt_LowChargeTemperature (Not Working / unable to test)
Alarm_Batt_LowCellVoltage(Can read)
Batt_State (Can read)
Batt_ErrorCode (Not Working)

Need help to know whether

  1. The modbus address given by victron is wrong and need a latest updated one
  2. Or those that are not working are not available for the Lynx Smart BMS
2

See a similar post from a few days back. Battery data is not forwarded from the BMS.