Cerbo GX MK2 VE.Can2 unstable

[lxonline (LX)]

The problem is not the device connected to the can 2 it is the can 2 signal being messed with. Fully discussed in the thread linked.

Pylontech BMS Connection Lost - firmware OS 3.51

On the latest firmware (3.51), Cerbo GX loses communication with Pylontech’s BMS - after a few minutes of operation. After returning to (backup) firmware 3.42, communication with Pylontech’s BMS is stable, but there is no connection via the Remote Console. The settings related to the remote console (on firmware 3.42) are correct.