Hello,
Each battery in victronconnect shows status as Balanced, but the Lynx BMS shows Imbalanced.
What is going on here? Do I need to worry? How to fix it?
Related, I have had these on 3 days of absorption for 8h and the status is balancing but never actually gets balanced.
Thank you,
Alex
In this voltage level you can not see the balance. Charge more to minimum 3,4V/Cell. Then the voltages will divergence and balancing is possible.
Thank you for the response. Today with those screenshots I am out at Anchor, later in the day we will have enough sun to reach absorption.
Yesterday and for three days before we were using the SHore power, and the voltage was in the range you specify and the BMS said it was balancing, but it never achieved balanced status. Despite 3 days of 8h sessions of absoprtion charge.
In that case why did it not balance?
THank you,
Alex
Hi,
Here you will see the BMS now saying Balancing, but each battery still says Balanced. And it will stay like this always, BMS never says balanced.
Any ideas for me?
Many thanks,
Alex
OK, I dont know why, but it looks like a bug, but I reset the SoC to 100% using victron connect, and then immediately the Lynx BMS reports the battery bank as Balanced.
Can anybody explain this?
Alex
