question

energy-z avatar image
energy-z asked

Is it possible to use a lead acid or OPzS batteries for a grid tie installation with multiplus II?

I'm trying to develop a system where my client uses lead acid batteries or opz to store energy from a grid tie inverter or from the grid at night to store energy and used when need it.


Can a victron system do this? Or does it need a way to control the battery output?

The system that i'm to achieved is similar to the one in the image bellow.

Multiplus-IIbatterylead-acid
1562578133223.png (50.8 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Rob Duthie avatar image
Rob Duthie answered ·

Hi

Yes it can do this, i have one my self, but use Lithium now, You will need a Colour control monitor, or a Raspi to control the ESS functions, and some energy metering in some cases.

Regards

Rob D

Rotorua

NZ

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

energy-z avatar image energy-z commented ·

By the way, there is no need to insert a module to define the battery capacity, right? Or when we define the capacity in the multiplus II is enough?

0 Likes 0 ·
Rob Duthie avatar image Rob Duthie energy-z commented ·

The Mulitplus has its own SOC % battery calculation internally.


Regards

Rob D

Rotorua

NZ

0 Likes 0 ·

Related Resources