I’ve added “Solar Report” and “Economic Solar Report” to my VRM settings, but I do not receive solar production reports (daily and periodic solar kWh, nor exports. Instead I receive a table that doesn’t make sense:
| Timezone: Europe/Berlin | Installed system | Comparison: grid 24/7, no storage, solar and generator | Difference | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Solar | Grid | Genset | Total | Grid | Total (EUR) | |||||||
| Days | Solar maintenance (EUR) | Grid usage(kWh) | Grid costs (EUR) | Fuel (L) | Fuel costs (EUR) | Run hours (hh:mm) | Costs (EUR) | Grid usage(kWh) | Grid costs (EUR) | Total (EUR) | Difference (EUR) | |
| 2025-07-28 09:00:00 | 0 | 0.2 | 0.08 | 0 | 0 | 0 | 0 | 0.08 | 29.91 | 11.96 | 11.96 | -2.96 |
| 2025-07-29 09:00:00 | 0 | 0.2 | 0.08 | 0 | 0 | 0 | 0 | 0.08 | 30.74 | 12.3 | 12.3 | -18.52 |
…
- If I don’t have a Genset, it shouldn’t output it.
- Grid usage is wrong, that’s more like my daily consumption (form solar and battery in summer time).
- Battery is completly missing from report.
- But at very least, I would like to see main figures, like solar production kWh, consumption and grid injection and grid consumption…
Victron support: My VRM installation is called “test” and you have access to it, if you need it.
Best regards,
Beat