After upgrading Venus to V3.54 the Victron Energy/Garmin OneHelm no longer displays Generator L1 and L2 volts, amps and watts. Victron Energy/Garmin OneHelm Generator does indicate “RUNNING”. Generator L1 and L2 volts, amps and watts display on Cerbo GX display.
I then upgrade to V3.60. Victron Energy/Garmin OneHelm will still not display Generator L1 and L2 volts, amps and watts on Garmin OneHelm.
See Victron announcement here.
[Venus OS v3.50 official release - New User Interface, Security and Generator Improvements - Q&A and troubleshooting / New UI - Victron Community]
See Victron Energy MFD Configuration here.
Note: Victron Energy needs to update the existing MQTT screen shots and instructions with current Venus OS v3.54 version.
[Marine Integration Guide [Victron Energy]]
Garmin GPSMAP 8600 Series OneHelm Victron Inverters are displaying properly. Generator Loads are displaying on the Cerbo GX Display. The Cerbo GX is connected to Garmin Network via RJ45. Our Yacht was delivered in 2021. We have been running Victron Energy systems on Garmin OneHelm for 5 years. Generator loads have always displayed on the earlier version on Garmin/Victron OneHelm. I did share my 2021 Garmin/Victron OneHelm experiences on earlier Victron Support. Those posts did not get transferred to current Victron Forum Support.
