Good day! A fresh thread for v3.70 beta feedback. If you haven’t seen them yet, make sure to go through the v3.60 slides: public - Venus OS v3.60 Release - Google Slides . Change log below, and first please make yourself aware with the beta testing instructions: Instructions 1 of 3: Venus OS bet…

[image] Derrick Thomas: I think I have found an issue with the gps dbus. I noticed there were some gps related changes a few versions back, not sure if the changes might be related. I have disabled all system mods and reinstalled a fresh firmware, still the same issue. Noted - we’ll look into…

Hello gentlemen . I have noticed at updating from 3.70 - 49 to newest 3.70 - 61 I lost lots of options to control MultiRS from NodeRed. But that may be that you filtered read only entities. But i have one more problem. It seems that my MultiRS is stucked in ESS with battery life even when i select …

[image] jkoljo: Hi Matthijs, thank you for your reply. I don’t really need a feature that would protect my main fuses when something else than Victron stuff is consuming too much. The MP2 doesn’t have to export to peak shave. However, currently my MP2 can and will burn a main fuse when my 3ph EV…

Hi @jkoljo yes, this will be looked into prior to the official release of v3.70. If you need anything urgently, I recommend to go back to the latest official release, being v3.67 at the moment.

Perfect. Thank you very much. I highly appreciate it.

There appears to be a issue with 3.70~61 On my Samsung s24 ultra running android 16, in beta vrm when you click on advanced mode there is no widget selector icon appearing at top of page, in either portrait or landscape orientation. Working fine on my s10 fe tablet running android 16 in landscape o…

This is VRM related, not Cerbo Firmware if I am correct.

@mpvader vmpvader Running 3.70-60 I’m having an issue with node-red if I use virtual switch to control cerbo relay the relay node shows “ an unknown error has occurred “ But having the flow control the relay without using virtual switch works normally.

hi Matthijs Thank you for the clarification. Good to know.

Venus OS v3.70~61 available for public testing

Beta testing Venus OS beta testing

roelw (Roel) 10 December 2025 14:12 274

Could you give feedback related to the following bug that I reported back in June, Venus OS v3.70~35 available for public testing - #29 by roelw / Help needed - SMA, Solar Edge, Kostal and others - #14 by roelw .

Topic		Replies	Views
V3.64 Node-RED - Not connected to D-Bus error Node-RED diy , domestic , node-red , gx_device , cerbo-gx	48	1175	24 October 2025
Shelly 3PM einbinden Deutschsprachiger Bereich vrm , cerbo-gx	81	3259	23 April 2026
Node Red & Shelly: Virtueller Zähler bleibt alle 3-4 Tage stehen, NodeRed overflow? Node-RED diy , energy_meter , node-red	14	151	29 April 2026
Where is Node-Red gone in Venus 3.60? Node-RED diy , domestic , gx_device	81	1373	3 July 2025
Paging all DESSies: Who wants to actively participate in a community DESS fork effort? DESS diy , dess , node-red , victron_community	40	814	21 November 2025

Venus OS v3.70~61 available for public testing

Related topics