Good day! A fresh thread for v3.70 beta feedback. If you haven’t seen them yet, make sure to go through the v3.60 slides: public - Venus OS v3.60 Release - Google Slides . Change log below, and first please make yourself aware with the beta testing instructions: Instructions 1 of 3: Venus OS bet…

[image] Rob Meerwijk: It happens all the time, especially when charging That of course should not happen. I have seen customers have problems with grid meters timing out because of a noisy environment within which the cables are running, or because they extended the RS485 cable in a less than…

[image] Rob Meerwijk: It happens all the time, especially when charging Is this by any chance on a USB connection? On a MP-II GX we have had consistent issues with USB based connections dropping (to VE-Direct / BMV Smartshunt) that turned out to directly related to: a) inverter power b) US…

I think I had GX display appearance: Dark and Remote Console appearance: Auto. Thanks for your hint regarding the fullscreen param. It did the job. However, I’m not sure why it’s non-fullscreen by default. I see no reason why anyone would prefer to have this frame displayed rather than taking 100% …

Hi Jan, thanks for your answer. In my case it happens mostly (almost exclusively) when charging the home battery. The USB/RS485 is official Victron and it runs completely free from any power cables or other cables.

I use the official USB/RS485 cable, standard length, running free from other cables. EM24 is ethernet connected. That makes a difference anyway. Hoping for the best. The logs show me no clue at all, as you can see in one of my previous posts . The meter simply dissappears.

I think I have found an issue with the gps dbus. I noticed there were some gps related changes a few versions back, not sure if the changes might be related. I have disabled all system mods and reinstalled a fresh firmware, still the same issue. The issue is that on dbus the Fix value shows ‘^’, an…

[image] Derrick Thomas: I think I have found an issue with the gps dbus. I noticed there were some gps related changes a few versions back, not sure if the changes might be related. I have disabled all system mods and reinstalled a fresh firmware, still the same issue. Noted - we’ll look into…

Hello gentlemen . I have noticed at updating from 3.70 - 49 to newest 3.70 - 61 I lost lots of options to control MultiRS from NodeRed. But that may be that you filtered read only entities. But i have one more problem. It seems that my MultiRS is stucked in ESS with battery life even when i select …

[image] jkoljo: Hi Matthijs, thank you for your reply. I don’t really need a feature that would protect my main fuses when something else than Victron stuff is consuming too much. The MP2 doesn’t have to export to peak shave. However, currently my MP2 can and will burn a main fuse when my 3ph EV…

Hi @jkoljo yes, this will be looked into prior to the official release of v3.70. If you need anything urgently, I recommend to go back to the latest official release, being v3.67 at the moment.

Venus OS v3.70~61 available for public testing

Beta testing Venus OS beta testing

Topic		Replies	Views
V3.64 Node-RED - Not connected to D-Bus error Node-RED diy , domestic , node-red , gx_device , cerbo_gx	47	1231	24 October 2025
Shelly 3PM einbinden Deutschsprachiger Bereich vrm , cerbo_gx	81	3763	23 April 2026
Node Red & Shelly: Virtueller Zähler bleibt alle 3-4 Tage stehen, NodeRed overflow? Node-RED diy , energy_meter , node-red	14	221	29 April 2026
Where is Node-Red gone in Venus 3.60? Node-RED diy , domestic , gx_device	80	1532	19 June 2025
Paging all DESSies: Who wants to actively participate in a community DESS fork effort? DESS diy , dess , node-red , victron_community	40	856	21 November 2025

Venus OS v3.70~61 available for public testing

Related topics