Venus OS, inaccurate time

[DirkW]

Hi dognose

Thanks for the tip

So, I’m a little further along…The installation is a little unusual:

VM-3P75CT connected directly to the Ethernet port via LAN cable, VRM/Internet via WLAN

See also

VRM /network problems after update 3.5 -> 3.60 Raspi

Thanks for help Works again GX devices can be simultaneously connected to the Internet on the WiFi interface and to a wired network on the Ethernet interface. This is achieved by setting the gateway address on the Ethernet interface to 0.0.0.0

In this configuration, the GX device does not seem to be able to reach an NTP server.

If you pull the network cable to the VM-3P75CT and repower the Raspi Pi , you will have the correct time.

The deviations described above are probably due to the fact that no NTP server could be reached for a long time and the time ran out.

There seems to be a difference between rebooting and disconnecting the Raspi Pi from the power supply.

Please recreate the scenario for a complete error analysis.

Dirk