Victron GX device firmware has been updated to v3.70. This release brings a greatly expanded switch pane with Node-RED virtual switches, improvements to GX Boat Page and E-drive integrations, cell level monitoring for Lynx Smart BMS NG, Garmin EmpirBus digital switching, Shelly smart device integrat…

Running 3.66 3.70 gives Low battery warning (which does not go away). It’s a Can connection by a Victron cable (JK PB BMS) Have reverted to 3.66 which again works fine This was reported during the beta’s

You will need to be clear if any third party mods are in use. Serialbattery etc.

[image] Daza: enable the other CT’s of the VM-3P75CT to read other tech independently of each other as that CT is getting lonely Waiting for that myself, I use my old Carlo energy meter to monitor grid and some AC PV in the other channel, I’d love to replace it with the faster Victron meter, …

Another relatively minor issue. While the solar yield on overview and brief page on the previous version listed watts or amps based on the setting, it’s now stuck on watts regardless of the setting.

All, Running Venus Large OS here. As of March 2, the “New UI” began hanging with a complaint of “device not connected to VRM”. The “Classic UI” remains functional. I upgraded to 3.70 Venus Large (and even reimaged to 3.70 Large) and have continued to experience the same issue. The NON Large 3.70 …

Any mods, third party drivers, devices etc attached?

Nick, No modifications, or third party drivers. Just a stock install of the Venus Large OS. It worked perfectly, until it didn’t on Monday. Thanks, Jeff

My cerbo gx autoupdted to 3.70 and lost connection to VRM. I checked it today and it cannot find any wifi adapters! Switched back to 3.67 and it works fine.

3.70 has been out some time already. 3.71 is already out a couple of days to address some issues.

Venus 3.70 released

Q&A and troubleshooting

Topic		Replies	Views
Venus OS 3.62 Q&A and troubleshooting multiplus , ess , professional , pylontech , multiplus-ii , cerbo_gx	22	1656	2 July 2025
Venus OS official v3.80 no vebus AC/DC values shown in UI DIY parallel	18	612	6 October 2026
Venus OS v3.50 official release - New User Interface, Security and Generator Improvements Q&A and troubleshooting 350-new-ui	16	12997	27 January 2025
Multiple systems on VenusOS 3.50 experiencing battery problems overnight DIY domestic , professional , bms , cerbo_gx	9	876	11 January 2025
VM-3P75CT shows no power readings after firmware update Q&A and troubleshooting professional , dess	22	816	23 September 2025

Venus 3.70 released

Related topics