Settings, Integrations, a menu for Shelly devices is there Can’t recall that before [Screenshot 2025-07-23 220639] Do they work ?

Are single phase shellys now supported with the full release of 3.70? I have a Shelly EM Mini Gen4 but are unable to add it. The console of the shelly shows request from venusOS after clicking the refresh button but the device doesn’t show up. The blog posts featuring 3.70 don’t mention a restric…

3.7 is to control the relay output of a shelly not the power meter

Based on the blog post i was expecting support for energy meters as well. Venus OS now natively supports Shelly Gen2 (and newer) smart switches, energy meters and RGB light controllers. from https://www.victronenergy.com/blog/2026/02/25/introducing-venus-os-3-70/

Hello, After updating to version 3.70, I wanted to test whether the Shelly Pro EM-50 was working. I enabled the Outbound WebSocket on the Shelly and configured the server address. Immediately afterwards, it appeared in the Cerbo GX console, but there are no readings and it does not allow me to co…

[image] Juanht: Therefore, at this point I understand that my device is not supported. See my post above from Feb 25 on how to use NodeRED to support the Pro EM50.

[image] Xulu: Is there a list of which models are supported natively and which ones require NodeRED? Not that I am aware of, perhaps someone else knows. I also have Shelly Gen3 PM Minis, they don’t show up either.

Hi @Xulu , Are single phase shellys now supported with the full release of 3.70? Unfortunately, single phase shelly EM’s are not supported yet. For the Shelly Pro EM50, only the relay will show up and not the EM. Support for single-phase EM’s will be added in the future.

Thanks for the response. Will support for single phase EMs get added in a patch release or only with 3.80? In case of the first, ist there a rough estimate when this happens? In addition it might be good to add a note on the blog post (and other documentation) stating that not all devices are ful…

Just cross posting to a topic Jeroen posted in Q&A. [image] Venus OS v3.70 - Shelly support Q&A and troubleshooting Since there are many questions about what support Venus OS v3.70 has and has not for Shelly devices, and since the manual is awaiting translatio…

V3.70 beta - new Shelly support

Beta testing Venus OS beta testing

Xulu 2 March 2026 00:43 122

Is there a list of which models are supported natively and which ones require NodeRED?
Does the Shelly EM Mini Gen4 require NodeRED as well or ist there some other issue on my end?

Topic		Replies	Views
Shelly 3PM einbinden Deutschsprachiger Bereich vrm , cerbo_gx	81	3697	23 April 2026
Venus OS v3.70 - Shelly support Q&A and troubleshooting expert , ekrano_gx	0	1540	2 March 2026
Shelly 3em nicht sichtbar in Remote Console und im VRM Deutschsprachiger Bereich beginner , vrm , multi_rs , cerbo_gx	41	1033	15 August 2025
NR Shelly 3EMpro via MQTT via Custom input Flow Node-RED node-red , mqtt , shelly	0	127	31 January 2026
3.70 Shelly Geräte Deutschsprachiger Bereich vrm , shelly	6	563	3 March 2026

V3.70 beta - new Shelly support

Related topics