SOC not showing in System Overview in VRM Dashboard

DIY
,
1

Hi everyone, I have a problem that many others seem to have had as well. In my installation the SOC is showing in every single view and widget but not in the System Overview within the VRM dashboard. This used to work but for some time before it stopped working.I’ve tried all the suggestions I could find. Still not showing up again.

It is very strange as the SOC is shown in every other view, including the widget on the iPad for example. I hope that someone can help me finding the root cause.

The system is a CERBO GX (firmware 3.54) with two MPPT, a MultiPlus and a REC BMS. All worked fine for some years and I don’t know what has changed.

Many thanks for your help!

Best regards, Michael

IMG_4971
IMG_49711601×1047 124 KB

IMG_4972
IMG_49722188×1583 173 KB

IMG_4970
IMG_4970714×706 82.6 KB

2

Hell us out here, i see SOC on your VRM screen shot and temperature so usually that menas that is the battery one.

So you are not referring to the one that is on the battery box (red) but you want the extra one that appears underneath (green box)? Or is it the blue line on the installation data overview?

3

Hi, I’m referring to the blue line that usually shows in the installation data view.

4

Noted.