I have a couple of Samsung SDI Battery (Model ELPM482) and I’m wondering if they’re compatibile with a Victron inverter, and if so, what connections/settings are required. [Battery] 715449196-4-84kWh-Standard-Product-Specification-R0-2-20190319.pdf (2.9 MB)

to log in to the cerbo from putty the user name is “root” set up putty , open a window , get the IP address from the cerbo > ethernet > scroll to bottom of page. put that IP address in to the putty session , it will ask for login , type root in lower case , then input the temp password you set up …

I found hat after I responded :smiley:

The UID’s are all wrong for the Victron protocol!!

its a translator, it gets the battery objects and passes them to the victron. So even if something is wrong right now and not perfect, if it doesn’t work, we find it in implementation. Most important part is to get can traffic on the bus. From there we can map anything.

[image] MikeD: The UID’s are all wrong for the Victron protocol!! The Problem Samsung SDI Battery: Was using ProductId = 0 (Unknown/Generic) Battery Aggregator: Correctly using ProductId = 0xBFFF (49151) The Fix Samsung SDI Battery: Now uses ProductId = 0xB005 (45061 - Lithium Batte…

Can you access the raw CAN data from a python module running in the CERBO?

Follow-up question. Again, thank you both very much for your help with this. Does this look like a reasonable equipment list? [image]

It I were you, I’d just start with just a cerbo. That way we can know if it’s actually going to work. I’m about 98% sure it will work, but I don’t know if you can make it work. I also don’t know if the Samsung uses the same wiring as the cerbo. I don’t know how many batteries you have or how much …

Hey Bachete, if you were in Melbourne I’d buy you a beer. You’ve been so helpful and I am very thankful. I’ll buy a CerboGX and have a noodle with it. I have 6 of the batteries, buy may only use 2-3 down in town. I’m thinking of using the others to fire-proof a farm which always has the power drop…

Alright. Sounds like a plan. From what I can gather, this should be your wiring. Signal Battery Side (CN7/CN8) Cerbo GX Side (BMS-Can) CAN High Pin 1 Pin 7 CAN Low Pin 2 Pin 8 CAN Ground Pin 3 Pin 3 So have a gander and see how she goes.

Samsung Battery compatibility

Modifications

bachete (dru) 7 January 2026 05:38 17

yes.

Topic		Replies	Views
Connect DIY BMS via CAN to Cerbo GX - Eigenes BMS via CAN mit Cerbo GX verbinden DIY diy , bms , cerbo-gx	11	248	16 July 2025
Battery name correct on older Cerbo units, incorrect on new Cerbo units Q&A and troubleshooting offgrid , gx_device , cerbo-gx	16	262	22 June 2025
Combining 4 or more LiFePO4 batteries BMS data to Cerbo GX DIY diy , offgrid , pv-inverter , vrm , bms , 3-phase	20	2836	15 December 2025
Kein Batteriewächter mehr verfügbar > keine aktuellen Daten, VE.Bus Battery Monitor not GUIavailable Deutschsprachiger Bereich diy , vebus , cerbo-gx	41	160	25 March 2026
No BMS CAN connection with Cerbo GX DIY bms , cerbo-gx , basengreen	28	1828	12 February 2025

Samsung Battery compatibility

Related topics