Remote console shows Wakespeed current as negative DC load

[pwfarnell]

I have a WS500 and works fine. I am also running mine on my AGM until I get the LiFePO4 installed after winter.

A couple of things to check on the WS500.

1. What happens if you set the “Is shunt backwards” to on.
2. Have you set “Enable OSEnergy (RV-C) CAN subsystem” to on.
3. Have you set “Enable NMEA2000 CAN subsytem” to on.

I am using “Victron SmartShunt (Requires Cerbo)” for the alternative CAN / BMS protocol.

There is a WS500 Facebook group with some knowledgable members.