HI All, trying to understand the control logic of the Cerbo/Ekrano relay function called “Alarm Relay”. Can relay 1 switch states based on VRM alarms?

It is designed to work with alarms generated by the GX itself. The main function described in the manual is to do with temperature. 9.3. Temperature relay configuration - 9. Configuration No results found

Thank you! However, the link to section 9.3 only references setting Relay 1 to be controlled by the temperature function. I am trying to drive Relay 1 based on a VRM based alarm by enabling Alarm Relay. I have not been able to get Relay 1 to change states based on any alarms. Any idea what contr…

The VRM has push notifications. They are designed to work through the apps. If you found a way to push those to the gx you might have luck. But it is not designed to work like that natively. You will have to look more into node red, get the gx to generate the alarm and latch or unlatch the relay a…

thank you for the prompt response! I will look into Node Red.

Purpose of the Cerbo relay 1 function, Alarm Relay?

Q&A and troubleshooting

Topic		Replies	Views
Relay alarm state Node-RED	2	71	18 March 2026
Victron Temp sensor DIY marine , diy , vrm , temperature_sensor , cerbo_gx	3	199	31 March 2025
Cerbo relay repeatedly clicking on and off Q&A and troubleshooting diy , gx_device , cerbo_gx	1	64	2 January 2026
Cerbo GX Relay for Temperature Control - Only Activates at Exact Temperature (Ruuvi Tag) Q&A and troubleshooting expert , relay , victron_community , cerbo_gx	6	276	24 December 2025
Cerbo gx relay logs DIY not-listed , cerbo_gx	1	44	9 January 2026

Purpose of the Cerbo relay 1 function, Alarm Relay?

Related topics