Hello everyone, I have a Victron system with a MultiPlus serving as both battery charger and 12V inverter in my camper. When I’m connected to shore power, I’d like to measure the total current consumption of the entire system on the GX display. To do this, I installed a Victron energy meter on the input side, so I can measure the electrical consumption of the heating system and the refrigerator, which do not pass through the MultiPlus.
I configured the Cerbo GX as follows: the energy meter is set to “energy meter,” and the 230V input is set as “grid.” However, on the display and on the VRM portal, I’m seeing negative values, and the current flow animation suggests that I’m feeding power back into the grid. How can I configure it correctly so that the readings are displayed properly?
