Hi everyone,
I have a camper equipped with a Victron system and a Cerbo GX. I’m trying to get the total AC consumption (including all AC devices in the camper, such as the fridge and heating system) to be displayed in the red “Netz” section on the Cerbo GX interface.
Currently, the “Netz” section does not show the total AC consumption. Instead, it only displays the power coming from the grid, and the “AC Loads” section displays the load coming directly from the MultiPlus output.
For reference:
I’ve installed a Victron AC energy meter at the main AC input of the camper, before the MultiPlus. This setup measures the total AC consumption, including devices like the fridge and heating system that use AC power directly from the grid.
I’d like this total consumption to appear in the “Netz” section (red box on the left).
I’ve attached two images for clarification:
The first image shows the current configuration, where “Netz” doesn’t include all AC loads.
The second image shows the total AC consumption (e.g., -1681W), which is what I want to see in the “Netz” section.
Could you please guide me on how to configure my system to display the total AC consumption (from the AC energy meter) in the red “Netz” section?
Thank you in advance for your help!
