Problems setting up ESS in a Multiplus II

[DirkW]

What MP2 model did you use?

AC-coupling and the Factor 1.0 rule [Victron Energy]

Is this the same system?

How to connect a GoodWe solar inverter to a Victron system, so I can see PV production

Has anyone connected a GoodWe solar inverter to a Cerbo GX. The system has a Multiplus II connected via a VE direct, and 3 x 5000kW Pylontech batteries connected Via VE can bus. The VRM and remote system shows all this so I knwo this bit is working. What I can’t see is the PV production. So any ideas how I can connect this to the cerbo. I did try a manual conenction using the GoodWe ip address, but nothing happened. Any ideas would be greatly appreciated.