I have a three phase system with a manually switched battery backup Quattro system that is only one phase. The Quattro is fed directly from the grid and a generator. The VM-3P75CT is connected to all of the loads and measures the energy being used by the loads regardless of the source (three phase g…

I have same issue but with em24 meter configured as AC load. Not visible on VRM.

It should be visible on VRM, just as a widget on the “Advanced” page. That doesn’t work for me as I want it to replace the readings from the Quattro. However there are other users who want to have a separate AC loads box on the main VRM page. I think both of those should be options, especially given…

Hi @KW4NP , I am going to move this over to the VRM beta space because we are putting some work into improving the handling of Energy Meters without Multis/Quattros soon. It might be some time before it gets responded to again, but it’s on the radar.

Following. Also interested to have an accurate output measurement visible on the dashboard.

Thanks for looking at this. I’ll be happy to test as you come out with the new firmware, please just let me know when it’s ready.

@guystewart , Any update on this issue?

This is also related, although not quite the same. This is a request to have it as a sub load, which would also be useful in my case.

I’d refer here my need/expectation regarding the EV Charging → How to make EVCS detached from Critical Loads summary? I think, Multis/Quatros could still measure the Loads. But: if we have EVCS, it should be not included in AC Loads/Critical Loads if we have meters configured as loads (any role),…

Please let the VM-3P75CT AC Load Meter be used as main load meter instead of Multi/Quattro!

Beta testing VRM beta

KW4NP 7 June 2025 14:27 9

Another question about this here. @guystewart is there any way to see where this is on your list? I have a client who is waiting for this to happen and they are thinking about doing a major rewire to make it work the way they want if this is not going to happen soon.

Topic		Replies	Views
Vm-3p75ct not showing as grid meter in vrm Q&A and troubleshooting diy , domestic , vrm , energy_meter	4	229	12 December 2024
VM-3P75CT role as AC-Load - position settings Q&A and troubleshooting victronconnect , expert , ess , pv_inverter , energy_meter	3	432	20 January 2025
Found a bug? VM-3PCT75 as AC Load showing incorrect values in VRM and Ekrano overview Q&A and troubleshooting expert , ess , ekrano_gx , multiplus-ii , cerbo_gx , vm-3pct75	0	201	16 November 2024
VRM Dashboard: Add external energy meter value configured as AC Load on AC Load detail box Q&A and troubleshooting expert , domestic , vrm , energy_meter	1	222	7 June 2025
VM-3P75CT Energy Meter adding to AC Loads when configured as Grid Meter DIY marine , victronconnect , beginner , ekrano_gx , cerbo_gx	1	228	13 January 2026

Please let the VM-3P75CT AC Load Meter be used as main load meter instead of Multi/Quattro!

Related topics