Hi All
Finished a bigger setup yesterday with 3 Multiplus II 15k, 70kWh Bat power and 5 smartmeter.
EM530 as grid meter, 3 Victron energy meter as PV-Inverters and the fourth one configured as AC-Load. Only citical loads should be battery powerd.
The Victron Smartmeter “Werkstatt” is configured as AC-Load and shows the correct value in Victron Connect.
Device List Ekrano - as well
But if it comes to the overview page it is not correct anymore
AC-Loads value is jumping around like a kangoroo.
As the installation is brand new - firmware is brought up to the latest sate - energy meter as well.
Here an other pic as the energy meter is configured as AC-Load.
Thank you for your input and have a great day.