1. Introduction This procedure and software will turn an Android tablet/phone into a dedicated display for GX products. The app, once installed, takes over the device, running in kiosk mode to ensure it functions as a dedicated display for GX devices. This means: The tablet will only serve as a GX…

I have the same with my Lenovo Android Go pad. It works for a couple of hours and after that only a reboot helps, and even then I have to wait for a few minutes for the UI to show up.

how is your cerbo connected to the network Wifi or LAN. Mine is wifi so today i am installing a 40m lan cable to my nearest network switch (currently i have a wifi access point 2m away from the cerbo).

Hi everyone, A new version has been released: v1.00beta5 This version includes major improvements and brings us closer to the final official release. Changes Auto-update mechanism added: No need to go through the entire QR code process to update the app. Users can manually check for updates in…

[image] Peter: I am having an issue, i have installed it on Samsung a9 worked fine for a while then suddenly i get error loading web with a reload button. I restart the tablet nothing still the same. I try to reselect the cerbo i can see it’s up in bold i select it nothing still the same page. B…

[image] Bret: Been working great for me except “Keep Screen On.” Every few days, that setting turns itself off. I turn the setting on, its fine for a few days, then I notice the screen off, press power button to wake up Android, it reconnects in a few seconds, and I go back to that setting and …

[image] felixreher: Similar issue here. Would it be possible to specify a GX device with an FQDN instead of just an IP? I am running VPN solutions that reach my VenusOS-Devices via a tunnel on port 80 or 443 - but the tunnel cannot be addressed via an IP address. Hi, We’ve released v1.00beta…

Hi, The double tap to wake is a feature tied to hardware and manufacturers only enable it on some models. It is not possible to implement it in the app. We’ve recently released a new beta version that enables full access to Android settings, you can check if your tablet has an option in the settin…

Hi, We’ve released v1.00beta5 adding an option to enable auto-rotate. The GX UI has been designed with this specific aspect ratio and it is not feasible to make it adaptive. [image] NEW: Use an Android tablet as dedicated GX Wi-Fi Display (beta) Venus OS beta testing …

Hi, Crashes can occur due to multiple reasons, some of them are out of our control. The latest version, v1.00beta5 includes several stability improvements that might help with the issue you are experiencing. I also recommend you to update your GX to the latest version.

NEW: Use an Android tablet as dedicated GX Wi-Fi Display (beta)

Beta testing Venus OS beta testing

jperez (jperez) 11 March 2025 11:46 276

Hi,
We’ve released v1.00beta5 making it possible to add a GX by a FQDN.

2 Likes

Topic		Replies	Views
Which Android tablet or phone should I use for the wifi GX display feature? Q&A and troubleshooting cerbo-gx , android-gx-display	21	1925	25 March 2026
Show us your Android GX WI-FI display installed Show us your system cerbo-gx , android-gx-display	30	3064	25 March 2026
Display Off Time non-Victron touch screen DIY diy , gx_device , victron_community , cerbo-gx	7	1017	6 May 2025
App Victron Connect not working / Victron Connect App funktioniert nicht Q&A and troubleshooting victronconnect , diy , vrm , multiplus-ii	41	481	14 October 2025
Android GX Display unable to connect to GX Device network configuration DIY beginner , gx_device , android-gx-display	5	366	17 August 2025

NEW: Use an Android tablet as dedicated GX Wi-Fi Display (beta)

Related topics