I bought a boat which has a Bluesolar MPPT 110/30 with bluetooth dongle connected to the VE.direct port. I am trying to change to a Cerbo CX using a new VE-direct cable. I replaced the dongle by the CX on the fly but the CX does not show the MPPT on the Victron Connect app. Is there a special routine for this?
With a BlueSolar you can only have Bluetooth via a dongle OR a data connection to the GX device.
If you still want to use VictronConnect to connect to the MPPT you need to go over the VRM Portal.
If the GX device is connected to your LAN/WLAN (and your phone is in the same network) or you are connected to the WiFi of the GX device it should also possible to connect to all the devices connected to the GX after you clicked on the GX first.
But I can’t find the reference to that in the manual/changelog right now.
Edit: It should look like this, after clicking on “devices” it should show you all devices connected to the GX.
Worked via VRM! I’ll try Victron Connect tomorrow, but I am already completely happy. Thanks!
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.