Hello, this morning around 5 o’clock , I got an notification from the FritzBox, that following device has logged on for the first time: 19.06.2025 05:04:09 PC-169-254-16-87 169.254.16.87 FE:37:5F:ED:D7:D1 LAN 1 Because I was not sure, if it is related to the Multiplus II GX Device (MP), I che…

Hi Nick, thank you very much for the hint ! I checked for modifications : [MPII_modification_1] => modifications in rc.local Then I disabled the modification and rebooted. [MPII_modification_2] but the gui_v1 keeps still empty. Then I’ve done an FW update to v3.62~1 (provided online by gui…

Maybe this will help: [image] After update from 3.55 to 3.60 Q&A and troubleshooting FYI It’s important before you update to 3.60 to update SetupHelper and/or other installed packages. I had an old version of TailScaleGX installed on my CerboGX and that caused a white s…

Dank je well Martiijn, when I do a fall-back to v3.54 the gui V1 appears as it should be: [GX_Remote_Console_working_gui-v1] So this is exactly the FW-state when I detacted the problem this morning, before I started to upgrad to v3.60 . Straingh that it is now working. It would be interesting to…

Did you installed some packages such as guimods? to check this you could scroll down in the settings menu If the menu option package manager exists then you have :slight_smile:

hmmm … not that I know :thinking: I went to the settings under gui v1, from beginning till the end [GX_Remote_Console_settings_top_gui-v1] [GX_Remote_Console_settings_mid1_gui-v1] [GX_Remote_Console_settings_mid2_gui-v1] [GX_Remote_Console_settings_end_gui-v1] nothing to see like “package ma…

Okay So it seem that your issue not related to any third party installed packages.

You can only check for mods via the cli. If you open gui v2 on 3.60 and go to general modifications it will confirm if any mods are loaded. The majority of issues are a result of mods loaded on the GX.

GX Remote Console : VRM : gui-v1 empty, no overview, neither settings etc

DIY

DutchSolarFreak (Martijn) 19 June 2025 10:29 2

Maybe this will help:

Topic		Replies	Views
White page in Classic UI after update from v3.55 to v3.60 or later version? Q&A and troubleshooting diy , vrm , gx_device , modification	11	1314	17 July 2025
Software update problems DIY vrm , gx_device , cerbo_gx	12	450	20 July 2025
V2 UI not loading DIY diy , gx_device , cerbo_gx	8	342	2 July 2025
Node red and remote console v1 not reacheable from VRM Node-RED vrm , node-red , gui-v2	19	309	27 July 2026
Gerbo gx problem with live vrm DIY diy , vrm , gx_device	9	222	21 August 2025

GX Remote Console : VRM : gui-v1 empty, no overview, neither settings etc

Related topics