Jip agree weird - the comms cables is CAT 6 industrial and they are not running in the same wireways. I am currently running of firmware version v510 - and planning to upgrade all tomorrow to latest…
The other thing to check is if there is stray voltage anywhere it shouldn’t be. Especially the neutral earth connection.
Morning, i have checked, all zero between Earth and Neutral
The issue re-occured, after the firmware update. All inverters stayed off and only after disconnection of the VE bus to cerbo restarted
Ok more feedback after reconfiguring the inverters using the remote Reconfiguring tool the same happened. I needed to disconnect the VE bus cable. Question do you need to terminate the bus as for the ve can
I think the Victron needs to look at this issue as I cannot always be on site to do changes or firmware updates
No you don’t.
These should not be done every time an update comes out. Even the gx should not be updated automatically, that is not good practice.
Once stable leave it alone. Especially right now with so many changes rolling out.
Are you really using beta on the GX on a large and complex system?
No I don’t use the beta on my customers systems. Only on my system which I use as a test bed.
The issues as note is applicable on my system as well on a customer but hit system is on the latest original system