[Feature Request] Integrate Alternator into VRM

[pbawesome (Selim Tanriverdi)]

I have a shunt measuring Alternator, and it does not show up anywhere on VRM besides advanced tab. I’d like to see the same overview on my GX UI as in VRM. It’s not even possible to see it as a “battery monitor” down below where the Quattro and other shunts would be.

1. Show Alternator in Flow Overview in VRM
2. Show Alternator Shunt in Battery Monitor Area
3. Show Alternator kwh down below where ac usage and solar kwh are

[MALL77 (Michael)]

Dear Victron Energy,

Can this post please get a tech support person reply?

It link to this post too

Orion XS (Alternator) has disappeared from my VRM page

My Orion XS (Alternator) has disappeared from my VRM page, however when I create a remote console it is there. The device is present on my OS as is all it’s data, it’s just odd that it no longer appears on the VRM page. Has there been an update?

and this one too,

Why are my Orions not showing on VRM?

Hi, my first post here. Is it normal that I don’t see the same Alternator Box on VRM? 2 Orion XS 12/50 /krat [IMG_1608] [IMG_1610]

[nickdb (Nick)]

Can’t comment if this is expected or not, will see if some clarity can be found.
To set the correct expectation:

This Community is predominantly volunteers, and the vast majority of the answers are provided by enthusiasts. It is not an Official Ask Victron site, for that please use the normal line of support.

Community Guidelines

Welcome, please read the Victron Community Guidelines here first! This Community is predominantly volunteers, and the vast majority of the answers are provided by enthusiasts. It is not an Official Ask Victron site, for that please use the normal line of support. Read the Victron Support page, and follow the steps in order After you have read the Support page, if you believe that Victron Community is the best place for your enquiry, please search the previous posts. If you find your question a…