I added a energy meter (VM-3P75CT) to my system with the role heat pump. However I donot see this in VRM or GUI and I cannot make an analysis of the usage of the heatpump. E.g. usage heatpump of last day/week/month/year. I can only see the actual usage and the total used energy. Do I miss something? …

What firmware version is on the VW-3P75CT it’s currently 1.11 I think it was only at 1.10 that I saw the watts in the VRM so if not you might want to update it

I use the latest version version 1.11 I used this energy meter VM-3P75CT before for my solaredge inverter. But after integration of solaredge with victron this energy meter was not needed anymore. I use this energy meter now for the heat pump. However when I used the same energy meter in the role o…

I made that thread too, but was about another issue about forecasting and that is solved with new software. Therefore I opened this new thread.

Yes must have been removed change the role to EV so you can see it in the VRM for now, at least you will be able to see the load

Energy meter VM-3P75CT added with heat pump role, but not visible in VRM and GUI and no graphs

Q&A and troubleshooting

mac 24 October 2025 11:53 4

Currently this feature is not available, see this thread.

Topic		Replies	Views
Missing power display on phase L3 of the VM-3P75CT meter set to the heat pump role Q&A and troubleshooting diy , vrm , gx_device	0	41	28 December 2025
V3.80~14 virtual Energy Meter Node-RED energy_meter	12	480	25 April 2026
Heatpump role in VRM not showing on the dashboard/Tile Q&A and troubleshooting diy , vrm , dess , 3-phase	1	231	9 November 2025
Wärmepumpe im VRM Portal Q&A and troubleshooting diy , vrm , victron_community , em24	11	509	15 December 2025
Energy Meter VM-3P75CT in VRM Dashboard integrieren Deutschsprachiger Bereich vrm , cerbo_gx	8	207	4 April 2026

Energy meter VM-3P75CT added with heat pump role, but not visible in VRM and GUI and no graphs

Related topics