A new installation with Cerbo GX, Multiplus II, Pylontech battreries, Existing PV inverter on AC-out with meter and Gridmeter (EM ethernet)Also a MPPT VE.Can 250/85. Monofase. All well conected. De batty loaded from the grid. Stays on 100% and does not discharge. DESS activated. Still no movement.

(D)ESS system (New) : with multiplus and Pylontech : battery does not discharge

Ludo 8 December 2024 22:00 11

Check this :

Topic		Replies	Views
New setup, DESS installed, not using battery capacity - Netherlands DESS beginner , dess	5	123	2 December 2024
ESS strange behavior. No excess export once SOC 100% is reached. Charge/discharge oszilation in EV DIY expert , ess , vrm , bms , cerbo-gx	12	137	1 May 2025
Dynamic ESS on Multi RS Solar not working (NOT fixed, update 03-03) DESS victronconnect , diy , ess , dess , dynamic_ess , multi_rs , 3-phase	9	332	3 March 2025
Strange behaviour on DESS running with Cerbo/Multi RS Solar DESS diy , ess , dess , multi_rs , cerbo-gx	19	132	3 April 2025
DESS doesn't charge batteries full speed DESS diy , dess , multiplus-ii	12	94	8 April 2025