Coordinated charge settings correct or not?

DIY
, , ,
1

Based upon my research coordinating charge settings would be best for my application. Here is my system:

  • Smart Solar MPPT 100/30 with two 250 watt panels
  • Orion XS 12/12-30 with dual alternators (380A)
  • Blue Smart IP22 Charger 12/30 (1)
  • BMV-712 Smart
  • Lynx Power In x2 (upgraded with MEGA fuses)
  • 200Ah battery bank (LiTime Group 24)
  • Connection via VE,Smart Networking

Here are my current charge settings:

RC 25-234
RC 25-2341620×1200 265 KB

I am interested in learning more regarding the pros and cons of coordinated charge settings and charge settings in general so I would be interested in hearing your thoughts.

2

In your position I would set the absorption and float voltages on the solar slightly higher than the other 2, (0.05 - 0.10V higher). Then you have some form of solar priority. When a low current is required the solar will provide it before the alternator or the ac supply.

1 Like
3

Have a look at setting up a Ve Smart network. Here is the manual.

20723-VE_Smart_Networking-pdf-en.pdf (1.2 MB)

1 Like