Question: We have a Victron system in an off-grid cabin. All the equipment is Victron except for the 6 battery rack (EG4 LL-S Lithium Battery | 24V 100AH | Server Rack Battery).Because the cabing is not used during the winter and the battery rack was at 100% charge and we had no load other that running the inverter to power the Internet connection, the 3 Victron charge controllers were disabled remotely. Now that the charge is about 50% we want to re-enable the 3 charge controllers but can’t find the option to do so remotely using the VRM remote console. We see the controllers in the OFF state but haven’t found a way to turn them back on. Please help! Thanks, Carlos
Try going to VRM, device list and ‘open in Victron Connect’