Auto switching between batt and mains

[lxonline (LX)]

There is a quick to set up one that uses the generator controls on the GX if you aren’t already using it to start a generator

Control charging from grid

gen for ac ignore.zip (911 Bytes) @MotoringMariah that is quite the panel. You will need to set your gen start stop on the gx to drive relay 1. Program your parameters on the GX. Import the above after unzipping. Adjust as the code by double clicking the node for the inverter as will be looking for my inverter still. There is a note there. Summary Deploy. Test. I had something else in mind but this seems simpler as you va basically ‘edit’ the code using the gx gui as you like. And have …