After update to 3.50 battery percentage doesn’t reach 100%

Q&A and troubleshooting New UI
, , , , ,
1

After update to 3.50 battery percentage doesn’t reach 100%. SmartShunt/600 Ah Battleborn LifePO4.

While new UI shows 99%, switching back to old UI and the display reads 100% again. The overview display follows the “SmartShunt” values in the device list which also shows 100% in the old UI and 99% in the new UI.

Reliably reproducible by switching UI back and forth.

VictronConnect app on iOS shows SmartShunt at 100%.

IMG_8198
IMG_81984032×2268 1.05 MB

IMG_8199
IMG_81994032×2268 807 KB

IMG_8200
IMG_82001170×2532 201 KB

2

Your battery is at 13.3v, missing 1.4Ah, so clearly NOT at 100%, maybe 99.x

The new version is clearly better then the older one.

As long as the inverter stays in float you won’t get 100%