Hi All,
Looking for some advice. My current setup is an Egon 12V DC Hub that features 2x Victron Smart 100/30 MPPT, Orion 50A DCDC Charger, Victron Smart Shunt, Victron 1000VA Invertor, ARB Compressor and the usual DC Loads. I am having an issue figuring out the wiring for the battery BMS. The victron smart battery requries an external BMS such as a Victron Smart BMS CL, this requries the following remote on/off connections (Chargers on/off and DC Load Disconnect). Due to the DC Hub being common for the DC Loads there is no DC Load disconnect signal option. Can the victron battery be used while only wiring the remote on / off signals from the chargers? Has anyone dealt with something similar that shed some light on the situation?
Cheers