Thanks for your report
- With the Pro 4PM all 4 channels are discovered. In settings, there is a device name and name for the channel. The channel names are used for the switches panel and the device name is use for the energy meter (see attached picture) is it possible to use the channel names for the energy meter, too please?
Unfortunately, the name displayed in the ac load overview is the device name, which is of course the same for all channels of the Pro 4 pm device. I see this is a bit inconvenient for the ac loads overview. We’ll think about improving this in Venus OS 3.80.
- The RGBWW has two channels one for the RGB which is being discovered and one for WW which is missing.
The Shelly pro RGBWW PM is not officially supported (has not been tested by us). From the device API overview I would expect that only the RGB component and the first dimmer channel (for the light or rgbx2light profile) are supported.
There is currently no support for Shelly CCT devices. So this is why the WW channel won’t show up on your system. I’ll put this (and the multi dimmer channel support) on the list for features to add in Venus OS 3.80.