under generator settings Conditions low voltage it is NOT possible to do anything with anything other than 12v batteries Tested on both UI’s [Screenshot 2024-11-30 at 5.29.01 pm] Same in 3.52

Is your system a 12v system? You probably need to explain a bit more.

It does NOT matter what system you have (mine is 48V)you can NOT set it to be over 12.3V

[image] This is what I see on v3.52, set to it’s max on a 48V system. You may need to delve deeper into your system/settings to see what’s amiss.

It does matter for troubleshooting purposes. As John mentioned its is fine on other systems. So to help or potentially find a bug, more information about your system is needed. V3.52 has been officially released. So topic moved to diy. Or it can go to Q&A

Hi JohnC Found out you Have to Set STOP value at the Bottom of the settings list screen BEFORE you can set the START value at the TOP of the settings list. Which makes perfect sense to ? Trap for Logical thinkers anyways All fixed now Thanks [Screenshot 2024-12-02 at 7.16.05 pm]

Venus 3.50-3.52 Generator Start Conditions

DIY

WolfBarn (Martin) 2 December 2024 06:42 6

Apologies did not think it would matter as it won’t go beyond the 12.3v

Topic		Replies	Views
Confusing UI for Genset battery voltage auto-start condition New UI bug_report	0	38	9 February 2025
Generator Start and Stop Settings DIY diy , gx_device , victron_community , cerbo_gx	2	230	20 November 2024
Genset Autostart Condition Battery Voltage does not match system Q&A and troubleshooting rv , professional , ekrano_gx , gx_device , cerbo_gx	0	25	10 September 2025
Generator Autostart Voltage settings in a non 12V configuration still use 12V! DIY beginner , offgrid , gx_device , victron_community	7	222	2 February 2025
Generator start stop does not work as it should? Q&A and troubleshooting beginner , domestic , pylontech , cerbo_gx	13	104	3 February 2026

Venus 3.50-3.52 Generator Start Conditions

Related topics