VE Transfer Switch with 120/240V

Q&A and troubleshooting
, , ,
1

We have a project that uses a split phase 120/240V input with L1 and L2 having 120V (L-N) and 240V (L-L). It does not use a neutral.

Can any of the victron transfer switches be used in this configuration. We have 2x inputs of the above load, one from grid and one from inverter and need to instantly transfer between the two when a power outage occurs.

2

Victron generally goes another way, the multiplus/quattro is always connected to the grid, the loads are connected to ac-out of the victron. The victron is always active as a UPS.

3

I’m specifically talking about the VE Transfer Switch.