Settings, Integrations, a menu for Shelly devices is there Can’t recall that before [Screenshot 2025-07-23 220639] Do they work ?

Here is the list of what devices the devoloper has tested and has worked atleast. HTTP based driver for Shelly energy meters to be used on VenusOS

What’s the reason why switchable devices cannot have the “pvinverter” role? I have an unused Shelly Plus 1PM and would like to use it to measure the output of an Hoymiles inverter. Thanks a lot.

[image] KajLehtinen: Here is the list of what devices the devoloper has tested What is missing in the list is the the Shelly Pro EM - I would like to replace the ET112, which does not work well to count my old Inverter… Did somebody already test the PRO EM?

My Shelly Pro EM 50 only shows up as a switch, which doesn’t do me any good.

My Shelly EM Mini Gen4 (1.7.0-miniemg4prod0) isn’t working, my other Shelly devices are recognized and working fine. [image] Shelly EM Mini Gen4 Ein kompakter Energiemesser, mit dem Du den Stromverbrauch Deiner angeschlossenen Elektrogeräte mit bis zu 16 A überwachen kannst. Ausgestatte…

My gen3 PM minis are not found either, while gen3 1PM minis are found correctly. They have basically identical configs. No authentication differences. Gen3 PM mini is very similar to Gen4 EM mini. Seems like the discovery algorithm misses some Shelly models.

Same story here - my 1PM Mini vanished with ~58. Back to ~54 and all working again. I didn’t have time to diagnose, just needed it working but clearly a bug in ~58. Cheers Phil

From Version -58 Shelly RGBW PM is recognized not only in 4x White mode, but also in RGB(W) including a color wheel in the switch pane. GREAT!! Preset function seems not working yet. However, the Shelly which is set to 4x White mode is now treated as an AC Load, but not shown as AC Load on the overv…

V3.70 beta - new Shelly support

Beta testing Venus OS beta testing

kaischmitz 10 November 2025 15:54 47

It looks like shellies with authentication turned on are not discovered. At least that’s what my experiments seem to show. Can someone confirm that?

Topic		Replies	Views
AC load control - how would you do it? DIY beginner , offgrid , domestic , ccgx_color_control	22	844	6 March 2025
Diskrepanz zwischen Anzeige von Victro Connect und Dashboard Deutschsprachiger Bereich victronconnect , cerbo_gx	19	205	23 December 2025
Shelly integration does not reconnect after Shelly device reboots (Cerbo GX, Venus OS v3.80) DIY expert , vrm , cerbo_gx , cerbo-gx	9	191	8 October 2026
SmartShunt contribution to "DC Power" display is incorrect DIY diy , offgrid , display , cerbo_gx	15	881	5 June 2025
Oscillating on a delta grid connection (3x230 without neutral) DIY	48	1114	27 April 2026

V3.70 beta - new Shelly support

Related topics