I have a Cerbo GX connected via NMEA 2000 to my Zeus 3s MFD. I have a Smart Shunt, MPPT, Orion XS, and a touch 50 connected to the Cerbo in a marine lithium setup. The MFD shows only 4 data points that can be added to the screen (the house battery bank - volts, amps, SOC, and time left ). My starte…

Some more info about my issue. The MFD did receive more data than it displays. The shunt battery info for the house and starter are shown on the devices data page ( photos attached). There is a separate data page showing the “system battery” which is the lithium house bank. Does anyone we know how …

I have read some posts, like this one, [image] Cerbo Gx and NMEA2000 PGN's Q&A and troubleshooting I am new to Victron but not to NMEA2000. I have two 1000A smart shunts connected to a Cerbo Gx running on VenusOS on a Raspberry Pi. The two shunts are connected via ve.dire…

I’m 99% sure that what you need to do is change the layout of that page in your B&G MFD. And no need to get into changing instances.

Thanks Orlando. I actually previously saw your posts and thought that I had the same problem as you. In another thread Matthijs ( Victron) thought my issue would be solved with device setting changes… but it wasn’t. This is what he wrote about the Victron expert ( Martin) who was talking to you…“Wh…

Hi BDN, So I think they added the ability to change this with in the GX software. I have mine set to Port = 2 and Stb = 3. This seems to work fine with Garmin and Raymarine. Maretron also works but you need to set the instance manually in their UI. Here is a Victron reference page, pretty good info…

Starter battery not showing on MFD

DIY

Skybolt 29 July 2025 00:42 5

This thread may help out: Cerbo Gx and NMEA2000 PGN's

Topic		Replies	Views
Cerbo GX Mk2 - NMEA 2000 connection not working DIY marine , beginner , nmea_2000_-_n2k , cerbo_gx	14	650	22 July 2025
Smart shunt not connecting to 3rd party display via nmea2k Q&A and troubleshooting marine , expert , nmea_2000_-_n2k , cerbo_gx	2	52	27 September 2025
Cerbo zeigt Spannung der Starterbatterie nicht an Deutschsprachiger Bereich beginner , ekrano_gx , cerbo_gx	2	186	15 April 2026
Cerbo gx mk2 im Wohnmobil die Starterbatterie in Volt anzeigen nicht in % Deutschsprachiger Bereich beginner , multiplus_2_gx , cerbo_gx	1	75	9 April 2026
How shows starter battery on display GX? (boat+SmartShunt aux) DIY marine , battery-monitor , display , cerbo_gx , smart_shunt	0	224	3 February 2025

Starter battery not showing on MFD

Related topics