Last two day’s the availability of the PV in the Cerbo-GX/display shows erratic behaviour (see red markings in the PV-Volt/Current graphic) Checked LAN cable from SolarEdge to switch and from switch to GX =oke Checked router on fixed adresses for the Solar Edge and Victron = oke Who can help me o…

Finaly the GX settings for the Modbus TCP communication and SunSpec handling had to be re-installed, seems to work okay again now! [IMG_1020] [IMG_1688] [IMG_1687] [IMG_1682] [IMG_1683] [IMG_1684] [IMG_1685] [IMG_1686]

[SolarEdge firmware 2026-05-11 093051] again the same problems! So now need to request to downgrade the Solar Edge SW version to 04.22.4 ?

See [image] Solaredge communication dropping every few minutes Q&A and troubleshooting After a Cerbo reboot my 04.24.22 was also running fine until next evening when SE is making a automatic reset.

SolarEdge data showing inconsistantly in GX

Q&A and troubleshooting New UI

nickdb (Nick) 11 May 2026 08:32 4

See

Topic		Replies	Views
Solaredge communication dropping every few minutes Q&A and troubleshooting vrm , multiplus-ii , cerbo_gx , solar_edge	283	7519	17 June 2026
Multiple solar edge inverters DIY diy , ess , pv_inverter , solaredge , multiplus-ii , cerbo_gx	5	265	16 September 2025
Cebro GX integration with Solar Edge Inverter via RS485-2 port and SunSpec Q&A and troubleshooting beginner , dess , rs485 , solaredge , cerbo_gx	9	209	23 January 2026
Victron und Solaredge ( Kommunikation TCP Modbus \| Wie geht das ? ) Deutschsprachiger Bereich cerbo_gx	8	475	29 December 2025
Overvoltage, Cerbo GX controlling SolarEdgePV, Sunspec: ‘Dynamic power limiting’ option not working Q&A and troubleshooting pv_inverter , professional , dess , solaredge , multiplus-ii , cerbo_gx , modbus	1	270	12 September 2025

SolarEdge data showing inconsistantly in GX

Related topics