Hi,
I have a BMS system with 2 Lynx Distributors + 1 BMS Smart.
I read that the BMS is not that smart, and can only receive batteries on the left side and loads and chargers go to the right side.
Flipping as show in the manual, doesn’t solve the problem as all the loads for the distributors come from the bottom.
Due to the tight set, up, it would be much cleaner if I can reverse the BMS, but I couldn’t find anywhere how to do it. Is there any option?
Otherwise I am thinking:
-
Option 1. Flipping the BMS and X crossing the cables from the distributors
Problem, size to support 500A is to big no? It will have to be pretty spaced as well to be able to cross them right? -
Option 2. Inverting all the + and - inside the distributors and connecting them with a bar to the BMS smart
Is that doable? Or will I get an error?
In the link, there is a image of the setup for reference: PXL-20240929-111601395 hosted at ImgBB — ImgBB
(Right bottom are the batteries coming, middle empty pending to install bms smart 500, and left bottom will be all loads)
Couldn’t find how to include images