Shelly relay visible and fully functional in GUI-V2 but not visible in GUI-V1

Q&A and troubleshooting
, ,
1

G’day all.

I am scratching my head with this one: How do I get a Shelly relay (Gen 3) to appear on the device list (and be controllable) in GUI-V1?

Details:

VenusOS 3.70~54 (Large) on RPi with Shelly 1 Gen 3 relay to switch a small circulation pump on a solar hot water system under Node-RED control. I called it ‘HW Circulation Pump’.

Everything works – WiFi connection, Node-RED control, switching from the GUI-V2 dashboard – but doesn’t appear on the V1 device list.

A screenshot of a chat AI-generated content may be incorrect.
A screenshot of a chat AI-generated content may be incorrect.601×305 30.2 KB

image
image511×302 57.3 KB

A diagram of a machine AI-generated content may be incorrect.
A diagram of a machine AI-generated content may be incorrect.499×297 61.3 KB

I know that the analog devices need to be enabled in dbus-adc.conf after a firmware update and wondering if there’s something that needs tweaking for the Shelly device to become visible? The difference here with the Shellys is that they all work perfectly in GUI-V2 but not V1, whereas the analog inputs disappear on both.

Any clues on what I’m missing?

Cheers

Phil