With the update of VRM to 3.7 I can now see my second inverter’s information directly on the “dashboard” (before I had to go to the “advanced” tab and scroll through to the corresponding widget). This is a big improvement for me and I wanted to say a big thank you for this. A few people had questioned this and it seems victron listened…
Out of interest, is there any chance of seeing this information on the display directly from the cerbo - the console view?
@BigB This is interesting for setups that have 2 separate standalone inverters.
Is this the scenario where you can connect a second inverters VE Bus via a MK3 USB to one of the USB connections on the cerbo?
Do please share further info and a screenshot of the VRM?
Thanks
Both inverters are connected to the same 948a OPZS battery in my off-grid house. The multiplus is running water pumps and the phoenix runs the house.
As you can see, the Multiplus status appears below the graphics. This is the new feature which is so useful to see at a glance what is happening.
IF I was to start again from scratch, knowing what I know now and understanding better what my needs would become (from what I originally thought they were) this is not how I would build my system. I would not be using a 12v system and I would have one bigger inverter. But this system has grown gradually and money is not unlimited so, at this moment, this is how it stands…
