Hi all,
I’m planning to get a multi RS Solar 6000 too, but I’m a little concerned about the input amps of the 2 MPPTs, datasheet says:
Maximum operational PV input current limit 13 A
Maximum PV conversion power 6 kW total – 3 kW per tracker
Maximum PV short circuit current 16 A
I’m planning to upgrade my solar panels too, but a modern bifacial panel( jinko, JAsolar,aiko,…) has a pretty low voltage and high current, for example the JAsolar jam54d41 440w has a Isc of 15.55A at 10% irradiation on the back side, it can in theory go over 16A.
My question is, will the MPPT clip at 13A or 16A (anything above is ‘oversizing’)? Or will it go in an error and shut down? Is this high current safe for the MPPTs?