My setup is Multiplus 2 48/50000 with a Cerbo-GX-S. My PV inverter is grid connected on the AC input (grid supply) side. Setup has been working well for some months since install, although PV inverter is always incorrectly displayed as being AC out (load side) of the Victron unit. In Cerbo its correctly reporting, just not on VRM dashboard. But since recent firmware updates, the grid tied PV inverter which has its output monitored by current sense device wired to Multiplus, is now disappearing and re-appearing on the VRM dasboard. When it disappears, Cerbo is reporting “not connected” and vice versa, and this does correspond with solar production being on and off according to time of day/night. Is this how it is supposed to work?
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| VRM portal show different grid data from Dashboard | 1 | 86 | 28 October 2025 | |
| VRM not showing grid/PV inverter voltages on the dashboard | 1 | 271 | 5 October 2024 | |
| Edit VRM dashboard | 23 | 734 | 9 December 2024 | |
| VRM and Venus GUI show different grid/AC Inverter flows | 0 | 57 | 27 August 2025 | |
| Position of AC loads and inputs in VRM for a Multiplus II GX | 2 | 468 | 14 March 2025 |