Hi! after the update, the charger won’t work properly. First it stays pretty long (about 1 minute) in test mode, which it never has done before. Then it switches back and forth between bulk and absorption mode (every few seconds). The voltage stays below 12.8V and current under 1.0A. It pretty much…

Problem with ip65 12/10

Ludo 6 December 2024 17:58 2

Looks like you’re not alone…

Topic		Replies	Views
Blue Smart Charger IP65 12/15 low voltage and current. FIRMWARE BUG DIY battery_charging , issue , bluesmart_ip65	8	886	26 December 2024
Blue Smart IP65 12v/15 won’t charge DIY beginner , lead-acid , vehicles	6	488	2 February 2025
Smart IP65 Charger 10A/12v not charging, switching between bulk and abs, after firmware update DIY diy , domestic , bluesmart_ip22	3	65	28 January 2025