My new Orión XS immediately raises a 12v battery to over 16v before I quickly turn it off. The input battery is a LFP and the output battery a sealed LA. I’ve discovered that this only happens when the Orion is connected to a Cerbo GX and DVCC is enabled. Disabling DVCC makes the problem go away. …

See thread, specifically: "When the OrionXS is configured as charger and DVCC is enabled on the GX system, the output of the OrionXS should be connected to the main battery that is controled by the GX system. The reason is that it is being controlled by the GX system and following the charge state …

Orión XS output voltage,rises to above 16v on a 12v system

DIY

system (system) Closed 29 October 2024 22:25 8

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.

Orion XS doesn’t seem to be charging lithium

Topic		Replies	Views
Orion XS charging voltage too high DIY orion_xs , cerbo-gx	6	165	28 February 2025
Orion XS doesn’t seem to be charging lithium Q&A and troubleshooting marine , diy , dc-dc_charger	11	169	5 January 2025
Orion XS DC-DC charger configured as a load DIY marine , vrm , professional , lynx_bms , cerbo-gx	1	142	12 January 2025

Orión XS output voltage,rises to above 16v on a 12v system

Related topics