My screenshots and more;
All wires used are 16mm2
Positiv and negativ leads;
2,5+2,5 =5 meters (start bat - Orion-Tr)
2,5+2,5 =5 meters (Orion-Tr - LiFePo4)
(Probably a bit less)
At 1500 rpm charging at 22-23A
I had 30A the first few weeks
Should be said that I did tweak the Orion-Tr parameters.
But I did not notice when the 5-7A was missed
Now looks like this when running;
Start battery voltage 13,98 Volt
(at the BMV-712)
Orion-Tr Input voltage 13,7 Volt
Loss in cable about 0,3 Volt loss
Orion-Tr Output voltage 13,7 Volt
Loss in cable 0,3 Volt
LiFePo4 battery intern voltage at 13,40 Volt
Victron Shunt voltage at 13,48 Volt
(similar to battery volt)
I have used my Thermo Camera without any surprices.
Pointing the camera at cables and terminals show temperatures at 25-30°C (outdoor at 17°C) no hot spots.
I can touch all wires without any problems.
Wil post screen shots in a few minutes;