Node red power control

[Bamss]

For installation scenario:

Charge the storage from the PV installation only to maintain the 40% level if we have reached 40% then do not charge wait until the power fed to the grid exceeds 10 kW then charge the storage to the maximum

I have Solaredge plus Hoymiles plus MPPT 250/100 connected to the system the problem is that the storage is constantly charging from Mppt

[arekp (Arek)]

You can use Node-RED to change the charge current to zero and restore it - depending on conditions you define.

[Bamss]

@arekp

You can use Node-RED to change the charge current to zero and restore it - depending on conditions you define.

**

**

[Bamss]